Leakage of SSR driving AC Solenoid
message: I have a 115vac ssr powering a solenoid only pulling a 160ma. upon activation 115vac is applied, but upon deactivation 78vac is still present. I’m told I need a bleeder resistor, but no...
Tagged: SSR
Normally Closed AC SSR
This is a Normally Closed PCB Mount SSR. That means when DC Control input is low, the triac is ON, the output passes the load current to turn on small heater-motor-lamp or a bigger...
Connection Diagram of DC PCB SSR
This is an Application note i used to give with my ssr – app012.pdf Diagram of SSR 5000 DC 3-30 Control / 230V AC N.O. @ 3A.
Three Phase AC SSR for 1 HP Motor
I need to build a three phase AC(in 120V)-AC(out 440V) solid state relay to turn on or off a small(1hp) three phase AC motor. Do you have any idea? Can I use three MOC3043...
SSR Open Circuit Leakage Voltage
hi been trying to use a dc ssr relay to switch 24 volt supply on and off for a unit i use that needs to see 0v or 24v but when the switch voltage...
Sourcing the SP646 Solid State Relay
I have a customer that call out a Solid State relay and i cannot find any information on it. Can you help? It is a SP-646. I need a quote on 60 and 120...
