Li-Ion Battery Charger

Advertise in delabs

This circuit is built around LM3647 an Universal Battery Charger, This Circuit is an untested design. It is based on application hints and was provided as an example to the user. This circuit gives a 12V DC from mains or battery and the battery is also charged when power resumes.

Li-Ion Battery Charger U1D monitors charge current and U1B monitors battery voltage these values are the feedback to charge controller U3. U1C drives Q2 to Control the charging process by switching in PWM. The LM7812 with a 2N6107 Current Booster Regulate the battery and mains DC to a 12V for powering the Product Circuits.

Li-Ion Battery Charger – del90005

Portable electronics have got a big boost due to batteries like Li-Ion. Here is a decade old circuit to charge a large battery. It can be scaled up or down in power. It has current and voltage limit protections.

More delabs Schematic Diagrams

  • 100kHz Half Bridge Convertor – SG3525100kHz Half Bridge Convertor – SG3525
    This is a SMPS Circuit application very close to the Application Note in the book SGS Motion Control Application Manual. This worked well. Read about [...]
  • Drive SCR thyristor with 555Drive SCR thyristor with 555
    This circuit gives a burst of pulses to fire 2 SCRs, when pin 4 is taken to 12V the SCR is turned on, to use [...]
  • Simple Printer Port InterfaceSimple Printer Port Interface
    Printer Port Circuit to see the inputs logic state and drive a few outputs. The preset control program helps test out the circuit operation. Use [...]
  • AC-AC SSR Solid State RelayAC-AC SSR Solid State Relay
    This is a AC Control Input AC Output SSR Solid State Relay. When a Process Controller has an AC output or a system generates an [...]
  • Audio Visual User Interface with AckAudio Visual User Interface with Ack
    This circuit is an User Interface part of a Security Alertness Monitor that i designed decades ago. The circuits are here – Digital Circuits – Part 1 The RAM [...]
  • Battery Backup SupplyBattery Backup Supply
    This is a 9V power supply which will work even on power failure. It uses a rechargeable battery and regulators. A transformer with 15-0-15 AC [...]
  • Millivolt Meter using a LM3914 LED Dot DisplayMillivolt Meter using a LM3914 LED Dot Display
    Here is a easy to read ‘Analog’ Millivoltmeter. Just like the Moving Coil Voltmeter, but does not have that resolution. This gives a easy indication [...]
  • Current Amp digital control – DMM ProjectCurrent Amp digital control – DMM Project
    R6 is the Shunt thru which the current to be measured passes. F1 fuse is to protect shunt. D1-D4 ensures that the current flow is [...]
About delabs 152 Articles
Product Design - Industrial Automation and Instrumentation. -