Voltage to Frequency Converter ICL8038

This was a small circuit made for driving an Impact counter. The heart being ICL8038. It must have been a Motor driving a Conveyor, the motor has a feedback attachment called Tachogenerator.

Voltage to Frequency Converter ICL8038

Only part of the circuit is shown here. See the image of product here Tacho Counter. The configuration is derived from the Application Notes of Intersil. The Voltage from Tachogenerator is Measured on a DPM-DVM and also fed to this circuit after attenuation and filtering. The square pulses of 8038 is used to derive a Logic pulse train for a CD4040. The CD4040 works of 0 and 12V. The above circuit is on +12 and -12. That is the reason R10-R15-Q1 are used. The pulses are 0-12V pulses. The Zero is Virtual like the Virtual Ground in low current power supplies.

  • Solid State Relay – Common
    This is a DC controlled Solid State Relay which can turn 230V AC equipment on and off. The output is like a NO normally open [...]
  • +5 to -5 using a 555 Astable Multivibrator+5 to -5 using a 555 Astable Multivibrator
    This is a very simple -5V supply using one 555, useful for analog blocks using FET Opamps using low power. This circuit came up when [...]
  • Simple Water operated relay
    This was done in my early days, i have upgraded it, it ought to work, reduce the number of transistors to make it less sensitive, [...]
  • Simple Digital Event Counter
    The basic digital circuits are Flip Flop and Counter, both are here. This circuit can be cascaded to make even a 6 digit event counter, [...]
  • Digital to Analog Converter with uC WatchdogDigital to Analog Converter with uC Watchdog
    This is the continuation of the earlier post. Part of 80C39 based Process Controller. In this schematic you can see the Watchdog and D/A Converter. [...]
  • Analog Dial  Amps-Volts-Ohms meterAnalog Dial Amps-Volts-Ohms meter
    This was designed, keeping in mind, that sometimes we have few components available and you could not carry your DMM somewhere, but you have to [...]
  • Precision Attenuator for Digital uC Control
    When Instruments are designed a analog front end is essential and also as most equipment have digital or microcontroller interface the analog circuit needs to [...]
  • Printer Port Logic AnalyzerPrinter Port Logic Analyzer
    This is a Test Circuit for Logic Analyzer software, with the Simple port circuit. The VB Logic Analyzer works, but is just an example program [...]
About delabs 160 Articles
Product Design - Industrial Automation and Instrumentation. -