Telephone status indicator with LED

This will monitor telephone status without loading the telephone line, this way if you have two phones in parallel you will know if one of them is busy. Connect the two ends of circuit in parallel to phone lines.

del00003

D1 to D4 make a bridge so that LED’s are powered in correct polarity. LED1 indicates line ok no broken line, LED3 can light only when a 12V Zener breaksdown, this shows if line is busy or free, so that you dont go online when someone is talking on the phone in another room. LED2 lights on an incoming call ringing signal.

Learn on Gadget Hacks and Making Things

This is a higher voltage at least in older exchanges, so the cap protects the LED, and LED Lights when a AC ringing signal occurs. D6 protects LED2 from reverse polarity.

Learning Science to Promote Scientific Thinking

Science is best learnt with practical lab work in tandem with theory. Theory becomes appetizing only with practical experiments. In fact theory should follow practical experiments.

delabs

delabs

Product Design - Industrial Automation and Instrumentation.

You may also like...

Leave a Reply