Simple Printer Port Interface

Printer Port Circuit to see the inputs logic state and drive a few outputs. The preset control program helps test out the circuit operation. Use safe 5V Levels.

Simple Printer Port Interface, Input-Output – del20005

So i made some example circuits and VB programs for students. A demo Milli Volt source, Digital Voltmeter and Logic Analyzer examples for learning, are on these pages. I have tried to derive power from PC itself in this circuit, Care should be taken not to short circuit or apply any voltages above 5V to PC Port Pins.

Simple Printer Port Interface

74HCT373 is the only chip used to interface the real world with the PC Parallel port. The Inputs to this chip are protected with Resistors and Zeners. 3 outputs of PC are also monitored using LEDs. This gives you a IO interface for experimenting. Below is a Preset counter simulation that you can use with this circuit for testing. Schmitt Triggers and Signal Conditioning may be required for Noisy and Non-Sandard Inputs.

  • WorkBench Dual Power SupplyWorkBench Dual Power Supply
    I will just explain part of this circuit. D9 and D10 provide a low cost -1.4 from -5 V. This is needed to reach near [...]
  • RS232 with Opto-Isolation
    I had to once interface an high voltage circuit to PC, The uC had to communicate thru RS232–Comm port–Serial Port. Part of the 80C31 8051 [...]
  • Presettable Up-Down Counter Timer
    When i had put the near Obsolete digital circuits online in the late nineties. One person who works in a public institution in the usa, [...]
  • LM311 Square Triangle Oscillator for PWM
    LM311 is a comparator, It operates from single 5V supply or dual supplies,input current 150 nA, 50 V-50 mA output drive capability. TTL-CMOS compatible output. [...]
  • Printer Port Logic AnalyzerPrinter Port Logic Analyzer
    This is a Test Circuit for Logic Analyzer software, with the Simple port circuit. The VB Logic Analyzer works, but is just an example program [...]
  • Constant Current Source LED Drive
    This is a Constant Current Source LED Driver, When the LED driver Upper-NPN is driven by a voltage thru 4.7K the LED lights up. Assume [...]
  • Mains Voltage Indicator with a LED
    This is a mains 230V AC voltage indicator and is a LIVE CIRCUIT, so take care. The Resistor has to be a fusible ceramic wire [...]
  • RTD 3-W Mains Power 4-20 mA TransmitterRTD 3-W Mains Power 4-20 mA Transmitter
    This is the Photo of a RTD 3-W Mains Powered Temperature 4-20mA Transmitter. The Circuits and PCB are hereĀ RTD PT100 Transmitter and Multiplexer.The CircuitĀ RTD-Pt-100-Transmitter. We [...]
About delabs 160 Articles
Product Design - Industrial Automation and Instrumentation. -