Printer Port Logic Analyzer

This is a Test Circuit for Logic Analyzer software, with the Simple port circuit. The VB Logic Analyzer works, but is just an example program to test and learn.

Printer Port Logic Analyzer

The speed at which the logic state changes say like 10 M Hz while probing even a PIC or 89C51, is too fast for this circuit. For that, the incoming data has to be spooled or stored in RAM at real time, by the external Hardware itself.

Test Circuit for Logic Analyzer software – del20006

As this is a Parallel Port Interface, an Embedded High Speed Digital RAM Storage of Multiple Logic input Channels with Signal Conditioning in the front end, could do the job. This is the minimum, if you want to program the rest of the instrument on Computer Software. Here is one you can see from Bitscope using USB or Ethernet.

  • Li-Ion Battery ChargerLi-Ion Battery Charger
    This circuit is built around LM3647 an Universal Battery Charger, This Circuit is an untested design. It is based on application hints and was provided [...]
  • 555 watchdog for uC and uP systems
    When the microcontroller hangs due to a spike, EMI or RFI etc. the 7555 will reset the uC, if proper power supply design is done [...]
  • Thermocouple and Current Input Module
    This input module converts J, K Thermocouple and 4-20 mA Inputs to 0-2V Full Scale. These can be used for any voltage/current inputs too. The [...]
  • Normally Closed AC SSRNormally Closed AC SSR
    This is a Normally Closed PCB Mount SSR. That means when DC Control input is low, the triac is ON, the output passes the load [...]
  • Blind Dial Analog Temperature ControllerBlind Dial Analog Temperature Controller
    This is a Low cost controller, Analog Dial Temperature Controller. It is also called Blind Controller. This essentially means Open Loop, just control the fuel [...]
  • Resistance measurement with Current Source – DMM
    U3 LF 356 is used as a constant current source (sink as the current is negative). R4, R5, R7 and R9 set the four resistance [...]
  • NO-NC SSR Plastic Box
    This was a Fire Retardant Plastic Box which was made for the SSR I/O Stackable Modules. DC Control for an AC Load. Usually it is [...]
  • Relay Driver – Electromagnetic
    This circuit is a standard way of driving Small Power Relays from Control Signals generated by Logic or Opamp Circuits. C2 and R5 form a [...]
About delabs 160 Articles
Product Design - Industrial Automation and Instrumentation. -