PLL using 4046 – Phase Locked Loop

CD4046 is a PLL or phase lock loop, it mainly consists of a VCO and phase comparators. This is a component in FM demodulation and modulation.

Mixed and Interface Circuits

PLL using 4046

It is used in a closed loop control to maintain a stable frequency. The Circuit above is good for learning the full use of a small Dual Trace Scope. The Circuit has both Analog and Digital areas and is a part of communication.

Read the pages above for building more Knowledge on PLL

  • AC-AC SSR Solid State Relay
    This is a AC Control Input AC Output SSR Solid State Relay. When a Process Controller has an AC output or a system generates an [...]
  • Sample and Hold with Standby CD4053
    A, B, and C are the Digital Control for x, y and z input and output pairs.The voltage at Vinx is stored in C1 when [...]
  • LM311 Square Triangle Oscillator for PWM
    LM311 is a comparator, It operates from single 5V supply or dual supplies,input current 150 nA, 50 V-50 mA output drive capability. TTL-CMOS compatible output. [...]
  • Diode ThermometerDiode Thermometer
    Measurement Of Temperature – When power transistors are used, they may tend to over heat. Likewise resistors may also overheat in the event of faults [...]
  • DMM range and AC-DC mode Logic
    This is the third circuit that you will need to build a Simple Benchtop DMM with no Microcontroller. Here the U1D and U1B 4093 acts [...]
  • Tera Ohm Meter and Insulation Tester
    This is a 20 Tera Ohm Insulation Tester I made around 20 Years Back. It had even Polarization Index for Transformer Insulation. It generated 1000V [...]
  • Printer Port 256 Relays 16K Dot Matrix
    Using this circuit on Printer Port, one could drive 256 Relays or 16K LEDs as Dot Matrix display. It can be used to drive a [...]
  • Using Thermocouple with DMM or DVMUsing Thermocouple with DMM or DVM
    In the circuit, use only metal film resistors (MFR) of 1 per cent tolerance, as this is an instrumentation application. Power supply should be a [...]
About delabs 160 Articles
Product Design - Industrial Automation and Instrumentation. -