PIC Micro
Picoload is a Program which makes it possible to program a microcontrolor peak 16f87X or 16F87XA from microchip without having has to remove this one of the assembly by means of a connection series RS232.
Picoload bootloader microchip pic
A bootloader based on the bootloader of bigonoff is carried out on the peak and makes it possible to manage the connection series as well as the writing of the program in the memory flash.
You will find among others: Courses on microcontrollers Pic and ARM, electronic assemblies, complete and operational applications such as a nursing home nursing system, a complete Home Automation System (Domocan), tips and tricks, free software including an editor for graphic LCD displays (BigLcd ),
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchip PIC16F1459 (or other PIC16F145x) 14 and 20 pin USB microcontrollers.
The platform provides all of the necessary hardware, software, and code examples necessary to quickly bring your next USB design from concept to production.
Low Pin Count USB Development Kit – pickkit
This is what i would use if i have to make a Quick USB Voltmeter or Ammeter.
If you want to do such a project, use Opto-Isolation for High-Energy circuits for Safety. The Analog Value from Attenuator, Shunt, Current Transformer is amplified and converted to frequency then thru opto-coupler reaches uC. This protects PC and User.Be very careful in High Voltage and High Current. Use proper transducers and Isolation to Protect man and machine.
PIC18F13K50/14K50 USB Flash nanoWatt uC
PIC Microcontroller with full speed USB 2.0 interface. Ideal device for battery-powered applications.
“The addition of mTouch(TM) touch sensing compatibility, a 10-bit ADC, motor control PWMs, and a host of serial interfaces make the PIC18F14K50 the perfect device to “Just add USB” to any application.”
This free project was designed to measure and control temperature in the range of – 55°C to +125°C with 0.1°C accuracy. It is based on the popular PIC16F628A microcontroller of Microchip.
The microcontroller uses the 1-Wire protocol ( sometimes known as a MicroLAN ) to communicate with a DS18B20 digital thermometer and a DS2405 addressable switch. The 1-Wire bus requires only one data line (and ground) for communication with a central microprocessor .
The interface application is designed to provide a friendly and flexible interface to the controller. It allows the controller settings to be read and written, and the process temperature to be monitored.
The 8-Bit CMOS microcontroller of Microchip PIC16F628A continuously reads the process temperature ( PVar ) from the DS18B20 sensor and depending on the desired temperature setpoint ( SPoint ) value of the process, manipulates the DS2405 addressable switch,using ON-OFF control algorithm
A complete ANSI C Compiler for the PIC series with Rapid Application Development front end. Fully inclusive of all of the C Compiler environment and functionality. This is for the PICmicro MCU microcontroller family.
WIZ-C – PIC C Compiler Simulator and IDE
This has Drag and Drop component selection. Point and Click pin connections and direct parameter selection by drop down lists, check boxes and validated data entry. It also supports In-Circuit Debugging and also can transfer to MPLAB. (professional version). They have a free demo version too.
There is a optional library set to considerably ease USB development. Included components support timers, serial interfaces, I2C, LCD, 7 Seg displays, keypads, switches, port controls, many bus interfaces including IIC and Dallas iButton.
Learn to program a PIC micro with C using FED
This free manual will take you through the process of learning C from variables through constants to pointers and then structures and unions. Most of the examples are standalone and are as small as possible to enable the purpose and effect to be easily understood.
This website provides you helpful information about Microchip PIC 8 Bit RISC microcontrollers. Several assembler source code listings are available for non-commercial use.
PIC RISC microcontrollers – Peter Luethi
There are also tools for using your PC for measuring or regulating electronic applications. I’am working on several projects, e.g. a precision digital altimeter to use in my radio controlled airplanes.
Swiss SmartROB Championships – Autonomously Navigating and Mail-Collecting Robot
The hardware consisted of a 300 MHz PowerPC CPU and a VME SmartCard Interface (switches, analog-to-digital converters, PWM engines, servos,…) built on a chassis. Our development software equipment was XOberon, a hard real-time operating system.
Radio Controlled Modeling – RC Circuits
PIC Assembler Projects, PIC Assembler Modules, Electronic Circuits, Student Projects, R/C Modeling Circuits, Servo Checker. Projects of Peter Luethi – Switzerland.
Precision Digital Altimeter
The current concept incorporates a wireless transmitter and receiver and is thought to be used for remote controlled airplanes or appliances with two seperate parts. In other words, we have one dedicated transmitter (acquisition, filtering) and one dedicated receiver part (user-interface, look-up table, calibration, storage),….
