Buffer or Unity Gain Op-Amp
If output impedance of a point is a high value then connecting another circuit at that point will load it resulting in malfunction or error. Buffers are used as interface between circuits. Low impedance...
If output impedance of a point is a high value then connecting another circuit at that point will load it resulting in malfunction or error. Buffers are used as interface between circuits. Low impedance...
U1 7555 is a CMOS version of 555. The 555 here is in Astable Oscillator mode, C1 and C4 are decoupling capacitors 0.1uF value, ceramic disc. Mixed and Interface Circuits The output is around...
This is the Analog front end of the 80C39 Process Controller. The analog input is protected by a Zener barrier, low leakage. You could use clamping diodes too. The non-inverting low-offset amp offers high input impedance....
I hope you can help me with a circuit. Its a voltage sweep circuit that will sweep from 0v to10v in a 45 min time period, I’m using it for an input on a...
I want to build a cheap wheel encoder by myself. – Need some help here. I want to build a cheap wheel encoder by myself. Now, my idea was to use a photodiode and...