Digital gain control of Opamp.

The gain of U1 can be controlled by a digital binary 1248 nibble at ABC. The gain at digital 000 is unity or 1 and the gain at various stages are set by 4051.

Precision Attenuator with Digital Control – delabs

There are eight different gains as the steps of gain resistor network is chosen by 4051. The on resistance of 4051 channel around 100E gets added to U1 pin 2 internal impedance.

Digital gain control of Opamp

Auto ranging 4-1/2 Digit Digital Voltmeter – delabs

You can use separate resistor networks with trimpots for each channel if you require but keep the networks total burden on U1 pin 6 to around 10K, not less than than. You can use this to set the gain of a amplifier with the help of a microcontroller.

About delabs

Product Design - Industrial Automation and Instrumentation. - delabs Technologies is an online EE Resource centered around Electronics Engineering Technologies. The Focus is on Product Design, Instrumentation and Automation.
Tagged , . Bookmark the permalink.

Comments are closed.