Audio Visual User Interface with Ack

This circuit is an User Interface part of a Security Alertness Monitor that i designed decades ago. The circuits are here – Digital Circuits – Part 1 The RAM and RTC part is missing, i will add later. It is without uC or Software. Only CMOS Logic.

Every Hour “+V UR” Goes High for 120 Seconds. The Buzzer Sounds and a Red LED turns on. The Guard has to respond by Pushing the Switch. The Green Light Flashes and the external Flip-Flop logic brings “+V UR” Low, The Buzzer Sound Stops and Red Light Goes off..

Audio Visual User Interface with Ack

If not pressed the Sound Stops after 120 Seconds and even the Red light goes off then. This records a Non-Alert Hour in the RAM for that Day. The Ram Stores 9 Days alertness status.

You could try porting this project into a 89C2051 for learning product and interface design.

delabs

delabs

Product Design - Industrial Automation and Instrumentation.

You may also like...