80C39 and MCS48 based Process Controller

The Early Microcontroller : 80C39 is a CMOS Version of 8048 the one that preceded 8031-8051. MCS48 is the set for that, MCS51 is the current set.

Here is an example project for 80C39-8748-8749 microcontroller. This code was written by me, and it works. But the documentation is not complete or may have errors.

80C39 and MCS48 based Process Controller

Process Controller code here 80C39 Code for MCS48 (editable spreadsheet online)

The circuit for these are on this page along with other circuits. This may be difficult to put together now. But the code and hardware is near compatible to 8051 uC. Now there are may types of ADC and uC.

This was supposed to have Analog in and Analog out. Some parts of the circuit may be in the 80C51 page. This has ramp-up and ramp-down settings for the Increment and Decrement buttons. This helps setting setpoint quickly. There is also debouncing for the pushbutton.

About delabs

Product Design - Industrial Automation and Instrumentation. -
Tagged . Bookmark the permalink.

Comments are closed.